 |
Product Elevators The Product Elevator offers the flexability of vaiable infeed and outfeed heights. The shuttle conveyor may be any Quickdraw conveyor length up to 30 inches. The elevator includes a metering stop and product sensor controlled by a PLC in the control enclosure. The shuttle conveyor is raised and lowered by a pneumatic rodless cylinder. Travel length and infeed/outfeed height are specified by the customer.
The pneumatic rodless cylinder is enclosed with a finished aluminum cover that includes an access area for vacuum fittings for cleanroom applications. The rear vertical frame has T-slots that run from the base to the top for optional mounting of support brackets or other hardware. This elevator is an ideal component for conveyor line walk-through bridges. Optional Lexan enclosure panels are available.
The Enclosed Lift Elevator is designed for over/under assembly lines. It consists of a metering device at the infeed position, a powered infeed conveyor, a powered lift (carrier size) conveyor, and a vertical actuator that raises or lowers the lift to the outfeed conveyor. The operation of the elevator is controlled by a PLC. The manual operation mode allows the operator to step through each sequence of operation. Standard verticallift capacity is 25 pounds. Cycle time is as low as 6 seconds.
 Product Elevators Information Sheet PDF
Features:
• Speed: up to 60ft per minute.
• Pallet weight up to 25 pounds.
• Bi-directional.
• Capacity to accumulate pallets.
• Contact an ACS Representative for more information.
|
|
|
| | |
